Connect with us
Games For Meta Quest Games For Meta Quest

Meta Quest

10 Definite Games For Meta Quest 2 To Play In 2023 By Mission VR: Watch

Salwa P

Published

on

Mission VR has recently revealed a review of Oculus Quest Top 2 games. There are many VR games, some of which may be different from what you consider the best VR game, but most have hit many gamers, as the best has been included here. You can also share with Mission VR games for meta quest 2 you think he might have yet to put on this list since there are several games to choose from.

10. The Walking Dead Saints And Sinners

The walking dead take the number 10 in the games for meta quest 2

because the Saints and Sinners chapter 2 is coming on December 1st, which is amazing. The first Walking Dead game also didn’t disappoint. One thing, chapter two will only require you to have played chapter one to qualify for it. The walking dead franchise has done really good work on the VR games, and chances are that these games will climb the ladder next year.

9. Until You Fall

This is one of the best sword-fighting RPG types of games for meta quest 2 that are out there for VR. The replay value, the music, and the combat stand out in this game, which feels fluid, with plenty of weapons options to choose from. The levels are amazing, and you can set the weapon functions to what suits you best. The developers may need to make the second one and add some dungeons to the games.

8. Red Matter 2

This is more than just a puzzle game; it is more of an adventure game with a decent story and some decent moments of combat with some amazing puzzles to it too. The graphics are just on top of this world, and if you combine this with the adventures in this game, it’s an experience you cannot forget.

7. Medal Of Honor

This game might not strike many as a top game, but this game hits differently. It may not be the real game you want with some bit of junkiness and disorienting cut scenes, but it is so much fun with incredible set pieces. It also has some pretty nice stories and adventures you will like in the games.

6. Contractors

This incredible PVP shooter game takes inspiration from Call Of Duty. It’s incredible as a standalone game with strong points in the modes like the modded Call Of Duty maps, modded Halo maps World War II, and a very solid game playing.

5. Bone Lab

This was a successor to bone works and made a lot of waves with mixed reactions from gamers. This boils down to what you like to do. Bone Lab will suit you better if you are a gamer who likes to create stories and do fun on VR in games like meta quest 2. The graphics are good, with pretty solid stories if you like story mode.

4. Blade And Sorcery

This game needs some imagination because there is no story in it. If you don’t enjoy a physics sandbox, this may not suit your kind of game. However, it may be ideal for you if you focus more on one style. It is very satisfying and fun to play with modes like the Star Wars mode and be able to wield a lightsaber in VR. This game will keep you glued because they have a continued update to what you have.

3. Into The Radius

Into the Radius is a survival shooter action game where you move out and do an open world where you can manage your inventory, you will be taking on anomalies around the globe. It has many things, like taking care of your weapons and organizing your backpack, making it realistic. This game looks good and runs well on Quest 2 with top-quality smoothness, and it’s just a solid game too.

2. After The Fall

This is among the best VR games, according to Mission VR. The gunplay is excellent, with fun levels and co-op mode. The game is captivating because it is challenging with rewards like the legendary disc. So much content is added to this game, making it even more fun. It falls in the Mission VR’s list of games for meta quest 2

1. Population One

This game tops Mission VR’s list of games for meta quest 2. It is a game in which you communicate in a team-squad-based effort to win a match. In the process, you also end up making friends in that type of environment. What’s great about this game is that you feel like competing in an athletic field, making it so different from just holding a controller. The overall competitiveness makes it the best PVP shooter on this list.

Watch Games For Meta Quest 2

Games For Meta Quest

Chief Content Strategist at Best VR Expert. Leveraging real-time data about Virtual Reality, AR, XR, Mixed-Reality, VR Games, and more. So you being a creator, gamer, a business or a tech enthusiast won't slip the best deals off; and can plan 2 steps ahead of your competitors, always!

VR Headset

What’s so fancy about Apple Vision Pro Specs? Compare Apple Vision Pro vs Meta Quest 3

Salwa P

Published

on

By

Apple Vision Pro vs Meta Quest 3

Finally, VR crazies can decide on which headset to go with for their gaming, work, and entertainment purposes. Budget is an obvious differentiator due to the varied specifications of each headset. Here’s the clear comparison between Apple Vision Pro vs Meta Quest 3 to choose from!

Disclosure: Our products are handpicked and may have offers & best deals for today. Some links are affiliates, we may receive a bonus if conversion occurs, at NO cost to you. Thanks for your support & understanding!

Apple Vision Pro vs Meta Quest 3

Comparison: (AVP) Apple Vision Pro vs Meta Quest 3

AVP In-Detailed SpecsApple Vision ProMeta Quest 3
Vr Headset SpecsApple Vision Pro VR HeadsetBuy Meta Quest 3
Supporting DevicesiPhone, Wireless, Compatible with Apple ProductsWireless, Also compatible with TV, Android, iPhone, Laptop and PCs
Reality TypeVirtual Reality (VR), Augmented Reality (AR)Mixed Reality (MR), Virtual Reality (VR), Augmented Reality (AR)
Games SupportedAR, VR GamesMR & VR Games
Pixels / ResolutionCustom micro‑OLED display system featuring 23 million pixels (more Pixels than 4K TV per eye)Micro‑OLED display with 2,064 x 2,208 pixels per eye
WirelessYesYes (with software)
Wifi / BluetoothYesYes
Peak Brightness300 nits100 nits
Field of View100-120° FoV110° FoV (Horizontal) & 96° FoV (Vertical)
Eye ProtectionYesEye Relief Option Available (in facial settings)
Audio3D Spatial Audio – Dual-driver audio pods (with jack for headphones like AirPods Pro (2nd generation))3D Spatial (with 35mm audio jack for headphones)
Weight450 g14.1 Ounces
Battery Aluminum‑encased battery; 2 hours of use, and all‑day use when plugged in1 A battery
Head TrackingYes, With a sensor array, high-resolution camera, precise head and hand tracking, and real‑time 3D mapping.6DoF (Degrees of Freedom)
Eye TrackingResponsive and Precision eye trackingNo
M2 ChipResponsive and Precision eye-tracking
R1 ChipProcessing input from the cameras, sensors, and microphones, streaming images to the displays within 12 milliseconds. This is for a virtually lag-free, real-time view of the world.Responsive and Precision eye-tracking
Device ColorsOff-White/Grey/BlackWhite
OpticsDual Pancake lensesPancake lenses
Refresh Rate90 Hz (yet to be updated)72 Hz, 80 Hz, 90 Hz, 120 Hz
Storage16 GB DRAM (Yet to be updated) + 1TB of SSD storage / 256 GB8 GB RAM + 128/512 GB
PortUSB-CUSB-C
Software / App Needed
(for wireless use)
Yet to be announcedAir Link or Virtual Desktop
App DirectoryVisionOSQuest+
Privacy and SecurityOptic ID – A secure authentication system that uses the uniqueness of your iris
Today’s Price See on the Order PageSee It
POPULAR

Apple Vision Pro – VR Headset

5

AVP offers an extraordinary visual experience with impressive display quality. Tech optimization of colors, contrasts, and brightness ensures that every image/video appears vivid, lifelike, and amazingly captivating. Access Full Review

Suitable for Gaming, Work, Movies & all sorts of Immersive Entertainment!

Buy Meta Quest 3

Meta Quest 3

4.4

You’ve got the scoop on Meta Quest 3, the headset that’s like a magician for your surroundings, promising a mind-blowing mix of reality and virtual awesomeness. It’s the real deal!

Meta Quest 3 Review

  • Blends with surroundings with Mixed-Reality
  • Room mapping
  • 500+ elements in the library
  • Best for Gaming, Fitness and Work
  • Slimmer and Sleeker Design
  • Adjustable IPD Slider
  • 4K High-Resolution Display
  • Similar battery life to Quest 2
  • Similar FoV as Quest 2
See Price on Amazon
Continue Reading

Meta Quest

How to Fix Oculus Quest 2 Controller Drift

David William

Published

on

How to Fix Oculus Quest 2 Controller Drift

Virtual reality has seen a revolution thanks to the Oculus Quest 2, whose independent VR capabilities offer an immersive experience. Controller drift is a typical issue that users may run into, though, much as with any electrical equipment. When the actual controller remains stationary, controller drift is the term used to describe the involuntary movement of the controller’s virtual representation in the virtual reality space. Although this problem can be annoying, don’t worry—we’ll walk you through a thorough solution to address Oculus Quest 2 controller drift.

Understanding Controller Drift

There are several reasons why controller drift might occur, from software bugs to hardware issues. The first step towards properly fixing the issue is identifying the root cause.

Step 1: Confirm the Issue

Be confident that controller drift is the cause of your issue before beginning any debugging steps. Verify whether your controller’s virtual representation moves by itself while you aren’t using it.

Step 2: Check for Updates

Make sure the software and firmware on your Oculus Quest 2 are up to date. Updates from Oculus frequently bring potential bug fixes and enhancements. In order to upgrade your Oculus Quest 2, take these steps:

  1. Activate the Oculus Quest 2.
  2. Join a reliable WiFi network.
  3. From the Oculus Home, navigate to the Settings menu.
  4. Go to the ‘Device.’
  5. Click on ‘About’ to see any modifications.

Install any updates that are available by following the prompts on the screen.

Step 3: Restart Your Oculus Quest 2

Restarting the computer can frequently fix software-related problems. Turn off and wait a few seconds before turning on your Oculus Quest 2.

Step 4: Check Controller Batteries

Controllers may exhibit unpredictable behaviour when their batteries are low. Verify the amount of battery power your controllers have. To see how the battery is doing:

Activate the Oculus Quest 2.

Open the menu for Oculus Home.

To determine the battery level of the controller, look for the battery icon.

Step 5: Recalibrate the Controllers

One possible solution to drift problems is to recalibrate the controls. You can adjust the Oculus Quest 2 controls as follows:

  1. Navigate through the Oculus Home menu to the ‘Devices’ tab.
  2. Proceed to ‘Settings.’
  3. Select “Device” and then “Set Up Rift.”
  4. To recalibrate your controllers, follow the directions displayed on the screen.

Step 6: Clean the Controllers

Drift might occur as a result of dust and particles interfering with the controllers’ sensors. Using a microfiber towel, gently wipe the controllers, being mindful of the tracking sensors.

Step 7: Change the Play Area Lighting

The Oculus Quest 2 tracking system’s performance may be impacted by uneven illumination. Make sure the area is well-lit, and if needed, think about changing the lighting.

Step 8: Update Guardian Boundary

Update the Guardian boundary if you’ve relocated or if your play area has changed. This minimizes the possibility of controller drift by guaranteeing that the Oculus Quest 2 appropriately detects your play area.

  1. Navigate to the ‘Guardian’ settings in the Oculus Home app.
  2. Select “Roomscale” or “Stationary” based on the size of your play area.
  3. To set up or modify your Guardian boundaries, adhere to the on-screen instructions.

Step 9: Factory Reset (if Necessary)

Try the aforementioned solutions, and if the problem still exists, you might want to consider factory resetting your Oculus Quest 2. Use this option only as a last resort because it will erase all of your device’s data and settings.

  1. Utilize the Oculus Home to access the ‘Settings’ menu.
  2. Select ‘Device’ and then ‘Reset View.’
  3. Choose ‘Reset All Settings’ and adhere to the prompts displayed on the screen.

You’ll need to reset your Oculus Quest 2 and pair the controllers anew afterwards.

Step 10: Contact Oculus Support

It’s time to contact Oculus Support for more help if none of the aforementioned fixes fix the controller drift issue. If the controllers are still covered by warranty, Oculus Support may give a replacement or extra advice.

Preventing Controller Drift in the Future

It’s crucial to take action to stop controller drift from happening again after you’ve resolved it. Think about the following advice:

1. Handle Controllers with Care

Please handle your controllers with care; do not drop or impact them. Physical harm may be a factor in tracking problems.

2. Store Controllers Properly

Store your controllers in a clean, safe place while not in use. Keep them away from excessive heat or humidity.

3. Keep the Play Area Clean

Dust and dirt should be regularly removed from your play area. The likelihood of interference with the controllers’ sensors is decreased in a clean environment.

4. Update Regularly

Update the software and firmware on your Oculus Quest 2. Fixes and enhancements that improve your VR system’s overall performance may be included in routine updates.

5. Be Mindful of Lighting Conditions

Make sure the lighting in your play area is sufficient and constant. The tracking system may be impacted by drastic changes in lighting.

6. Check for Interference

The Oculus Quest 2 tracking technology may be interfered with by nearby wireless networks and Bluetooth devices, among other technological gadgets. Determine and get rid of any possible interference sources.

You may reduce the possibility of controller drift in the future and have a more dependable and engaging virtual reality experience with your Oculus Quest 2 by taking these preventative steps.

Virtual reality has seen a revolution thanks to the Oculus Quest 2, whose independent VR capabilities offer an immersive experience. Controller drift is a typical issue that users may run into, though, much as with any electrical equipment. When the actual controller remains stationary, controller drift is the term used to describe the involuntary movement of the controller’s virtual representation in the virtual reality space. Although this problem can be annoying, don’t worry—we’ll walk you through a thorough solution to address Oculus Quest 2 controller drift.

Understanding Controller Drift

There are several reasons why controller drift might occur, from software bugs to hardware issues. The first step towards properly fixing the issue is identifying the root cause.

Step 1: Confirm the Issue

Be confident that controller drift is the cause of your issue before beginning any debugging steps. Verify whether your controller’s virtual representation moves by itself while you aren’t using it.

Step 2: Check for Updates

Make sure the software and firmware on your Oculus Quest 2 are up to date. Updates from Oculus frequently bring potential bug fixes and enhancements. In order to upgrade your Oculus Quest 2, take these steps:

  1. Activate the Oculus Quest 2.
  2. Join a reliable WiFi network.
  3. From the Oculus Home, navigate to the Settings menu.
  4. Go to the ‘Device.’
  5. Click on ‘About’ to see any modifications.

Install any updates that are available by following the prompts on the screen.

Step 3: Restart Your Oculus Quest 2

Restarting the computer can frequently fix software-related problems. Turn off and wait a few seconds before turning on your Oculus Quest 2.

Step 4: Check Controller Batteries

Controllers may exhibit unpredictable behaviour when their batteries are low. Verify the amount of battery power your controllers have. To see how the battery is doing:

Activate the Oculus Quest 2.

Open the menu for Oculus Home.

To determine the battery level of the controller, look for the battery icon.

Step 5: Recalibrate the Controllers

One possible solution to drift problems is to recalibrate the controls. You can adjust the Oculus Quest 2 controls as follows:

  1. Navigate through the Oculus Home menu to the ‘Devices’ tab.
  2. Proceed to ‘Settings.’
  3. Select “Device” and then “Set Up Rift.”
  4. To recalibrate your controllers, follow the directions displayed on the screen.

Step 6: Clean the Controllers

Drift might occur as a result of dust and particles interfering with the controllers’ sensors. Using a microfiber towel, gently wipe the controllers, being mindful of the tracking sensors.

Step 7: Change the Play Area Lighting

The Oculus Quest 2 tracking system’s performance may be impacted by uneven illumination. Make sure the area is well-lit, and if needed, think about changing the lighting.

Step 8: Update Guardian Boundary

Update the Guardian boundary if you’ve relocated or if your play area has changed. This minimizes the possibility of controller drift by guaranteeing that the Oculus Quest 2 appropriately detects your play area.

  1. Navigate to the ‘Guardian’ settings in the Oculus Home app.
  2. Select “Roomscale” or “Stationary” based on the size of your play area.
  3. To set up or modify your Guardian boundaries, adhere to the on-screen instructions.

Step 9: Factory Reset (if Necessary)

Try the aforementioned solutions, and if the problem still exists, you might want to consider factory resetting your Oculus Quest 2. Use this option only as a last resort because it will erase all of your device’s data and settings.

  1. Utilize the Oculus Home to access the ‘Settings’ menu.
  2. Select ‘Device’ and then ‘Reset View.’
  3. Choose ‘Reset All Settings’ and adhere to the prompts displayed on the screen.

You’ll need to reset your Oculus Quest 2 and pair the controllers anew afterwards.

Step 10: Contact Oculus Support

It’s time to contact Oculus Support for more help if none of the aforementioned fixes fix the controller drift issue. If the controllers are still covered by warranty, Oculus Support may give a replacement or extra advice.

Preventing Controller Drift in the Future

It’s crucial to take action to stop controller drift from happening again after you’ve resolved it. Think about the following advice:

1. Handle Controllers with Care

Please handle your controllers with care; do not drop or impact them. Physical harm may be a factor in tracking problems.

2. Store Controllers Properly

Store your controllers in a clean, safe place while not in use. Keep them away from excessive heat or humidity.

3. Keep the Play Area Clean

Dust and dirt should be regularly removed from your play area. The likelihood of interference with the controllers’ sensors is decreased in a clean environment.

4. Update Regularly

Update the software and firmware on your Oculus Quest 2. Fixes and enhancements that improve your VR system’s overall performance may be included in routine updates.

5. Be Mindful of Lighting Conditions

Make sure the lighting in your play area is sufficient and constant. The tracking system may be impacted by drastic changes in lighting.

6. Check for Interference

The Oculus Quest 2 tracking technology may be interfered with by nearby wireless networks and Bluetooth devices, among other technological gadgets. Determine and get rid of any possible interference sources.

You may reduce the possibility of controller drift in the future and have a more dependable and engaging virtual reality experience with your Oculus Quest 2 by taking these preventative steps.

Continue Reading

Trending