Connect with us
nintendo next move nintendo next move

Meta Quest

All you Need to Know about Oculus Quest 2 Controller Replacement 

David William

Published

on

One of the hottest VR headsets in the game currently is Meta Quest 2, also known as Oculus Quest 2. Of course, there are reasons why many users find this mid-range VR gadget an appealing option, from standalone wireless abilities and low price to an expansive library of software.

But apart from the headset, the controllers are also excellent and have contributed to the popularity of the device. But just like any other tech hardware, they are prone to wear and tear. In this article, we are going to discuss everything you should know about the Oculus Quest 2 Controller Replacement. 

Best % Saver Oculus Quest 2 Black Friday Deals – Get Details

Can you replace the Oculus Quest 2 controllers? 

The good news is that the controllers of this headset can be replaced in case they fail or get damaged. You can simply purchase them separately (right and left) for around $90 each. Or you can purchase the much more advanced Meta Quest Touch Pro controllers that go for $370 for the pair but also come with a charging port. But there is a way you can save on replacement or repair costs – warranty. If the warranty is still valid, you can request for your Oculus Quest 2 controller replacement or repair from the official support page. 

Where can you buy Oculus 2 controllers?

An important point to note about buying Oculus Quest 2 controllers is that you can purchase them from Meta directly. At the time of writing, the Quest store had stocked up the products, unlike previously when they were out of stock for a few months. The store has both right and left controllers, and the delivery period can range from a few days to a week. You can also purchase them from third-party online shops like Amazon, but this will always be a costly option. I should also mention that when getting them from the Meta Quest shop, you should make sure that you are on the right ordering page. The reason for this is that the Oculus Quest 2 controllers are not the same as the one used by the first Oculus Quest

Can you repair the Oculus Quest 2 controllers yourself? 

Quest 2 controllers are very complex gadgets, and it is recommended that you attempt to repair them yourself. For one, you could damage them even more or even harm yourself if you don’t know how to repair the controllers. My advice would be to officially file for a repair request with the support team at Meta. But this will not be free. If this fails, you can take your controller to a repair shop, and they will probably do a great job if they have experience with such controllers.

Oculus Quest 2 Accessories – This is how you enhance your VR Experience with Quest 2

 

Steps for replacing Oculus Quest 2 controllers 

Unlike repair, you can replace your Oculus Quest 2 controllers yourself. Simply follow these steps: 

Confirm warranty

The first thing to do before diving in is to check if the device is still under warranty. If the warranty is valid, you may qualify for a free replacement. 

Buy new controllers

If your warranty is expired or you damaged it in a manner that is not covered by the warranty, you will have to buy a replacement.  As mentioned somewhere in this article, you can buy a replacement through the Oculus store, online stores such as Amazon, or authorized retailers. 

Synchronize your new controller

Do this by: 

  • Ensuring your Oculus Quest 2 is on and working properly.
  • Launch the Oculus app and link it to your Oculus Quest 2.
  • Set the new controller in pairing mode. You can do this by pressing and holding the Menu buttons and the Oculus simultaneously until you see the LED light on the controller blink.
  • Navigate to Settings > Devices > Pair New Controller and pair the new controller by following the on-screen guide. 

Test your new controllers

After pairing the new controllers, test them to make sure they function properly within your game and virtual reality experiences. 

Note that this is just an overview. Make sure you have the Oculus Quest 2 manual with you so that you can follow each step as provided for replacing your controller. 

Can you play with controllers? 

Thankfully, you can continue playing Oculus Quest 2 without your controllers as you wait for the repair or replacement to arrive. This was made possible by a new feature that was added by Meta to enable users to control the headset interface without using controllers. Direct Touch is the name of the new feature and was included in the v50 operating system as an update to expand on the original hand-tracking options. But the downside is that very few games support this feature, so you probably will not be able to play games with your Oculus Quest 2 controllers. Nevertheless, you can scroll through the headset interface, watch videos on platforms such as Netflix, or launch apps. All without needing your controllers. 

Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

VR Headset

What’s so fancy about Apple Vision Pro Specs? Compare Apple Vision Pro vs Meta Quest 3

Salwa P

Published

on

By

Apple Vision Pro vs Meta Quest 3

Finally, VR crazies can decide on which headset to go with for their gaming, work, and entertainment purposes. Budget is an obvious differentiator due to the varied specifications of each headset. Here’s the clear comparison between Apple Vision Pro vs Meta Quest 3 to choose from!

Disclosure: Our products are handpicked and may have offers & best deals for today. Some links are affiliates, we may receive a bonus if conversion occurs, at NO cost to you. Thanks for your support & understanding!

Apple Vision Pro vs Meta Quest 3

Comparison: (AVP) Apple Vision Pro vs Meta Quest 3

AVP In-Detailed SpecsApple Vision ProMeta Quest 3
Vr Headset SpecsApple Vision Pro VR HeadsetBuy Meta Quest 3
Supporting DevicesiPhone, Wireless, Compatible with Apple ProductsWireless, Also compatible with TV, Android, iPhone, Laptop and PCs
Reality TypeVirtual Reality (VR), Augmented Reality (AR)Mixed Reality (MR), Virtual Reality (VR), Augmented Reality (AR)
Games SupportedAR, VR GamesMR & VR Games
Pixels / ResolutionCustom micro‑OLED display system featuring 23 million pixels (more Pixels than 4K TV per eye)Micro‑OLED display with 2,064 x 2,208 pixels per eye
WirelessYesYes (with software)
Wifi / BluetoothYesYes
Peak Brightness300 nits100 nits
Field of View100-120° FoV110° FoV (Horizontal) & 96° FoV (Vertical)
Eye ProtectionYesEye Relief Option Available (in facial settings)
Audio3D Spatial Audio – Dual-driver audio pods (with jack for headphones like AirPods Pro (2nd generation))3D Spatial (with 35mm audio jack for headphones)
Weight450 g14.1 Ounces
Battery Aluminum‑encased battery; 2 hours of use, and all‑day use when plugged in1 A battery
Head TrackingYes, With a sensor array, high-resolution camera, precise head and hand tracking, and real‑time 3D mapping.6DoF (Degrees of Freedom)
Eye TrackingResponsive and Precision eye trackingNo
M2 ChipResponsive and Precision eye-tracking
R1 ChipProcessing input from the cameras, sensors, and microphones, streaming images to the displays within 12 milliseconds. This is for a virtually lag-free, real-time view of the world.Responsive and Precision eye-tracking
Device ColorsOff-White/Grey/BlackWhite
OpticsDual Pancake lensesPancake lenses
Refresh Rate90 Hz (yet to be updated)72 Hz, 80 Hz, 90 Hz, 120 Hz
Storage16 GB DRAM (Yet to be updated) + 1TB of SSD storage / 256 GB8 GB RAM + 128/512 GB
PortUSB-CUSB-C
Software / App Needed
(for wireless use)
Yet to be announcedAir Link or Virtual Desktop
App DirectoryVisionOSQuest+
Privacy and SecurityOptic ID – A secure authentication system that uses the uniqueness of your iris
Today’s Price See on the Order PageSee It
POPULAR

Apple Vision Pro – VR Headset

5

AVP offers an extraordinary visual experience with impressive display quality. Tech optimization of colors, contrasts, and brightness ensures that every image/video appears vivid, lifelike, and amazingly captivating. Access Full Review

Suitable for Gaming, Work, Movies & all sorts of Immersive Entertainment!

Buy Meta Quest 3

Meta Quest 3

4.4

You’ve got the scoop on Meta Quest 3, the headset that’s like a magician for your surroundings, promising a mind-blowing mix of reality and virtual awesomeness. It’s the real deal!

Meta Quest 3 Review

  • Blends with surroundings with Mixed-Reality
  • Room mapping
  • 500+ elements in the library
  • Best for Gaming, Fitness and Work
  • Slimmer and Sleeker Design
  • Adjustable IPD Slider
  • 4K High-Resolution Display
  • Similar battery life to Quest 2
  • Similar FoV as Quest 2
See Price on Amazon
Continue Reading

Meta Quest

How to Fix Oculus Quest 2 Controller Drift

David William

Published

on

How to Fix Oculus Quest 2 Controller Drift

Virtual reality has seen a revolution thanks to the Oculus Quest 2, whose independent VR capabilities offer an immersive experience. Controller drift is a typical issue that users may run into, though, much as with any electrical equipment. When the actual controller remains stationary, controller drift is the term used to describe the involuntary movement of the controller’s virtual representation in the virtual reality space. Although this problem can be annoying, don’t worry—we’ll walk you through a thorough solution to address Oculus Quest 2 controller drift.

Understanding Controller Drift

There are several reasons why controller drift might occur, from software bugs to hardware issues. The first step towards properly fixing the issue is identifying the root cause.

Step 1: Confirm the Issue

Be confident that controller drift is the cause of your issue before beginning any debugging steps. Verify whether your controller’s virtual representation moves by itself while you aren’t using it.

Step 2: Check for Updates

Make sure the software and firmware on your Oculus Quest 2 are up to date. Updates from Oculus frequently bring potential bug fixes and enhancements. In order to upgrade your Oculus Quest 2, take these steps:

  1. Activate the Oculus Quest 2.
  2. Join a reliable WiFi network.
  3. From the Oculus Home, navigate to the Settings menu.
  4. Go to the ‘Device.’
  5. Click on ‘About’ to see any modifications.

Install any updates that are available by following the prompts on the screen.

Step 3: Restart Your Oculus Quest 2

Restarting the computer can frequently fix software-related problems. Turn off and wait a few seconds before turning on your Oculus Quest 2.

Step 4: Check Controller Batteries

Controllers may exhibit unpredictable behaviour when their batteries are low. Verify the amount of battery power your controllers have. To see how the battery is doing:

Activate the Oculus Quest 2.

Open the menu for Oculus Home.

To determine the battery level of the controller, look for the battery icon.

Step 5: Recalibrate the Controllers

One possible solution to drift problems is to recalibrate the controls. You can adjust the Oculus Quest 2 controls as follows:

  1. Navigate through the Oculus Home menu to the ‘Devices’ tab.
  2. Proceed to ‘Settings.’
  3. Select “Device” and then “Set Up Rift.”
  4. To recalibrate your controllers, follow the directions displayed on the screen.

Step 6: Clean the Controllers

Drift might occur as a result of dust and particles interfering with the controllers’ sensors. Using a microfiber towel, gently wipe the controllers, being mindful of the tracking sensors.

Step 7: Change the Play Area Lighting

The Oculus Quest 2 tracking system’s performance may be impacted by uneven illumination. Make sure the area is well-lit, and if needed, think about changing the lighting.

Step 8: Update Guardian Boundary

Update the Guardian boundary if you’ve relocated or if your play area has changed. This minimizes the possibility of controller drift by guaranteeing that the Oculus Quest 2 appropriately detects your play area.

  1. Navigate to the ‘Guardian’ settings in the Oculus Home app.
  2. Select “Roomscale” or “Stationary” based on the size of your play area.
  3. To set up or modify your Guardian boundaries, adhere to the on-screen instructions.

Step 9: Factory Reset (if Necessary)

Try the aforementioned solutions, and if the problem still exists, you might want to consider factory resetting your Oculus Quest 2. Use this option only as a last resort because it will erase all of your device’s data and settings.

  1. Utilize the Oculus Home to access the ‘Settings’ menu.
  2. Select ‘Device’ and then ‘Reset View.’
  3. Choose ‘Reset All Settings’ and adhere to the prompts displayed on the screen.

You’ll need to reset your Oculus Quest 2 and pair the controllers anew afterwards.

Step 10: Contact Oculus Support

It’s time to contact Oculus Support for more help if none of the aforementioned fixes fix the controller drift issue. If the controllers are still covered by warranty, Oculus Support may give a replacement or extra advice.

Preventing Controller Drift in the Future

It’s crucial to take action to stop controller drift from happening again after you’ve resolved it. Think about the following advice:

1. Handle Controllers with Care

Please handle your controllers with care; do not drop or impact them. Physical harm may be a factor in tracking problems.

2. Store Controllers Properly

Store your controllers in a clean, safe place while not in use. Keep them away from excessive heat or humidity.

3. Keep the Play Area Clean

Dust and dirt should be regularly removed from your play area. The likelihood of interference with the controllers’ sensors is decreased in a clean environment.

4. Update Regularly

Update the software and firmware on your Oculus Quest 2. Fixes and enhancements that improve your VR system’s overall performance may be included in routine updates.

5. Be Mindful of Lighting Conditions

Make sure the lighting in your play area is sufficient and constant. The tracking system may be impacted by drastic changes in lighting.

6. Check for Interference

The Oculus Quest 2 tracking technology may be interfered with by nearby wireless networks and Bluetooth devices, among other technological gadgets. Determine and get rid of any possible interference sources.

You may reduce the possibility of controller drift in the future and have a more dependable and engaging virtual reality experience with your Oculus Quest 2 by taking these preventative steps.

Virtual reality has seen a revolution thanks to the Oculus Quest 2, whose independent VR capabilities offer an immersive experience. Controller drift is a typical issue that users may run into, though, much as with any electrical equipment. When the actual controller remains stationary, controller drift is the term used to describe the involuntary movement of the controller’s virtual representation in the virtual reality space. Although this problem can be annoying, don’t worry—we’ll walk you through a thorough solution to address Oculus Quest 2 controller drift.

Understanding Controller Drift

There are several reasons why controller drift might occur, from software bugs to hardware issues. The first step towards properly fixing the issue is identifying the root cause.

Step 1: Confirm the Issue

Be confident that controller drift is the cause of your issue before beginning any debugging steps. Verify whether your controller’s virtual representation moves by itself while you aren’t using it.

Step 2: Check for Updates

Make sure the software and firmware on your Oculus Quest 2 are up to date. Updates from Oculus frequently bring potential bug fixes and enhancements. In order to upgrade your Oculus Quest 2, take these steps:

  1. Activate the Oculus Quest 2.
  2. Join a reliable WiFi network.
  3. From the Oculus Home, navigate to the Settings menu.
  4. Go to the ‘Device.’
  5. Click on ‘About’ to see any modifications.

Install any updates that are available by following the prompts on the screen.

Step 3: Restart Your Oculus Quest 2

Restarting the computer can frequently fix software-related problems. Turn off and wait a few seconds before turning on your Oculus Quest 2.

Step 4: Check Controller Batteries

Controllers may exhibit unpredictable behaviour when their batteries are low. Verify the amount of battery power your controllers have. To see how the battery is doing:

Activate the Oculus Quest 2.

Open the menu for Oculus Home.

To determine the battery level of the controller, look for the battery icon.

Step 5: Recalibrate the Controllers

One possible solution to drift problems is to recalibrate the controls. You can adjust the Oculus Quest 2 controls as follows:

  1. Navigate through the Oculus Home menu to the ‘Devices’ tab.
  2. Proceed to ‘Settings.’
  3. Select “Device” and then “Set Up Rift.”
  4. To recalibrate your controllers, follow the directions displayed on the screen.

Step 6: Clean the Controllers

Drift might occur as a result of dust and particles interfering with the controllers’ sensors. Using a microfiber towel, gently wipe the controllers, being mindful of the tracking sensors.

Step 7: Change the Play Area Lighting

The Oculus Quest 2 tracking system’s performance may be impacted by uneven illumination. Make sure the area is well-lit, and if needed, think about changing the lighting.

Step 8: Update Guardian Boundary

Update the Guardian boundary if you’ve relocated or if your play area has changed. This minimizes the possibility of controller drift by guaranteeing that the Oculus Quest 2 appropriately detects your play area.

  1. Navigate to the ‘Guardian’ settings in the Oculus Home app.
  2. Select “Roomscale” or “Stationary” based on the size of your play area.
  3. To set up or modify your Guardian boundaries, adhere to the on-screen instructions.

Step 9: Factory Reset (if Necessary)

Try the aforementioned solutions, and if the problem still exists, you might want to consider factory resetting your Oculus Quest 2. Use this option only as a last resort because it will erase all of your device’s data and settings.

  1. Utilize the Oculus Home to access the ‘Settings’ menu.
  2. Select ‘Device’ and then ‘Reset View.’
  3. Choose ‘Reset All Settings’ and adhere to the prompts displayed on the screen.

You’ll need to reset your Oculus Quest 2 and pair the controllers anew afterwards.

Step 10: Contact Oculus Support

It’s time to contact Oculus Support for more help if none of the aforementioned fixes fix the controller drift issue. If the controllers are still covered by warranty, Oculus Support may give a replacement or extra advice.

Preventing Controller Drift in the Future

It’s crucial to take action to stop controller drift from happening again after you’ve resolved it. Think about the following advice:

1. Handle Controllers with Care

Please handle your controllers with care; do not drop or impact them. Physical harm may be a factor in tracking problems.

2. Store Controllers Properly

Store your controllers in a clean, safe place while not in use. Keep them away from excessive heat or humidity.

3. Keep the Play Area Clean

Dust and dirt should be regularly removed from your play area. The likelihood of interference with the controllers’ sensors is decreased in a clean environment.

4. Update Regularly

Update the software and firmware on your Oculus Quest 2. Fixes and enhancements that improve your VR system’s overall performance may be included in routine updates.

5. Be Mindful of Lighting Conditions

Make sure the lighting in your play area is sufficient and constant. The tracking system may be impacted by drastic changes in lighting.

6. Check for Interference

The Oculus Quest 2 tracking technology may be interfered with by nearby wireless networks and Bluetooth devices, among other technological gadgets. Determine and get rid of any possible interference sources.

You may reduce the possibility of controller drift in the future and have a more dependable and engaging virtual reality experience with your Oculus Quest 2 by taking these preventative steps.

Continue Reading

Trending